Hydraulic tools
1. Manually operated hydrotest pump – MHX
Lightweight aluminium alloy pump unit with integral factory set safety relief valve. High grade stainless steel pistons for increased resistance to corrosion. Smooth manually operated 2-way pressure and release valve with precise control. Stainless steel powder coated 15 litres capacity reservoir with extended foot reaction bar. Multi-positional 610 mm lenght operating lever with retaining washer […]
2. Single acting very low height pancake cylinder – HVL
Single acting, load return. Compact, very low height design for access in narrow spaces. Nitrocarburised piston rod for corrosion resistance. Low friction bearing surfaces. Anti-extrusion seals for improved performance at high pressures.
3. Hammer blow wire rope and cable cutter – HWC
Manufactured from high quality, shock resistant ductile iron. Heat treated, tool steel cutting blade, fully contained within housing for increased safety. Suitable for cutting wire ropes and electrical cables.
4. Double acting wire rope cutter – HWRC
Features a double acting cylinder which offers a faster and positive return. High grade steel construction. Open jaw design cutting head allows easy access for the material to be cut. Specially toughened high tensile steel blades and jaws. Designed for cutting high tensile locked coil wire ropes and solid steel bars. Fitted with quick connect […]
5. High pressure hydraulic hose
Available in black or red outer covering to assist with identifying advance and return lines in double acting hydraulic systems.
6. Aluminium jack – JAH
Lightweight aluminium construction with critical parts manufactured from high quality steel. Available with plain piston, lifting claw or failsafe mechanical lock ring. Claw lift capacities from 8 to 24 tonnes. Safety over stroke limiting device.
7. Aluminium jack – JAS
Lightweight aluminium jack body. Spring assisted piston retraction. Nitrocarburised steel piston for increased corrosion resistance. Over stroke safety limiting device.
8. Compact jack – JCS & JCH
Spring assisted piston retraction (JCS). Load return piston (JCH). 360 degree positional pumping mechanism for increased versatility. Internal safety overload valve.
9. Jaw spreader – JS
Single acting, spring assisted return. Narrow design requires access gap of only 13 mm. High strength forged steel construction. Easy connection to hydraulic pump and hose using supplied quick connect coupling. Compact, lightweight and easy to use.
10. Digital pressure gauge
High quality, general purpose gauge to measure pressure up to 1000 bar (14,503 psi). Displays readings in bar, psi, mpa and kg/cm2. LCD display with 12 mm, 5 digit upper line pressure reading and 6 mm, 5 digit lower unit reading. Blue backlight allows for easy reading in poor vicibility conditions. Minimum 2000 hours battery […]
11. Pressure gauges & gauge mounting blocks
Choice of dry or glycerine filled models available. Recommended for use within all hydraulic systems to monitor hydraulic pressure. Dual scale reading on all models. Gauges scaled to match high tonnage cylinders (over 109 tonnes) available on request. Individual gauge calibration certificates available at extra cost on request.
12. Mechanical flange spreader – MFS
Manually operated mechanical feed screw design. Capable of opening flanges up to 2 x 95 mm thickness. Economical and safe operation. High grade steel construction with high tensile cross bolt. Case hardened spreading wedge. Compact, portable and easy to use.
13. Single acting nut splitter – NS
Single acting, spring assisted return. Angled body design for increased clearance on flanges and flat surfaces. High quality steel construction. Suitable for splitting nuts up to RC44 hardness. Designed to fit on all Api and ANSI flanges. Offers ideal “cold cut” solution for applications where “hot work” permits are not allowed. Steel linkage keeps blade […]
14. Hydraulic pipe bender – PB
Lightweight aluminium bending frame. Designed to offer smooth, wrinkle free bend on various sizes and thicknesses of JIS standardised conduit pipes. For use on pipe sizes from 16 to 82 mm (1/2″ to 3″). Can be operated by manual or powered pumps up to 700 bar. Portable and easy to use. Bending shoes are available […]
15. Comprehensive hydraulic puller kit – PKC
Multi-purpose puller kit comprising of grip puller, bearing puller, bearing cup puller and cross head puller. Choice of 2-way or 3-way jaw pulling options. Incorporates safety overload prevention valve within hydraulic pump. Detachable hydraulic system with hollow bore cylinder for use in other applications. Supplied as a complete set with all necessary hydraulic components in […]
16. Hydraulic 2 & 3 way puller kit – PKS
Available in choice of 2 or 3-way puller configurations with 4.5 tonne and 10 tonne models offering a combination of both options. Incorporates safety overload prevention valve within hydraulic pump. Detachable hydraulic system with hollow bore cylinder for use in other applications (excluding 4.5 tonne model which has solid piston design cylinder). Supplied as a […]
17. Self-contained hydraulic puller – SCP
Available in 3-jaw configuration only. Integrated hydraulic cylinder, pump and puller assembly for easy operation. Ergonomic 360° rotating handle for easy positioning during use. Incorporates safety valve to minimise the risk of puller overload. Spring-loaded centre point for easy centering of the puller to the shaft. Supplied complete with piston rod extension piece and storage […]
18. Stepped jaw spreader – SJS
Single acting, spring assisted return. High strenght steel construction. Compact, lightweight and easy to use. Low height jaw tips can easily fit into an 8 mm gap. Maximum spreading distance 60 mm when using the supplied step blocks. Self-contained spreader unit (SJS10-M) incorporates an integral manual hydraulic pump with multi-position operation lever.
19. Self-contained cable crimping tool – SC
180° rotating head standard on all open jaw design models. Incorporates an integral hydraulic pump for easy operation. Automatic pump pressure release valve for correct pre-set crimping force. Ergonomic grip handles for reduced operator effort and easy of use. Supplied with standard die sets and carrying case. Model SC18X is suitable for cripming non-insulated terminals […]
20. Toughlift jacking system – TL
Choice of air or electric driven hydraulic system. High flow 3-stage pump unit offers faster advance and retract times. Solid tyres fitted as standard with option of pneumatic tyres. Narrow width wheels and redesigned wheel position for better ground clearance and balance when manoeuvring. Push button remote hand pendant controller with 5 metres control cable. […]
21. Tool box
Choice of 4 sizes. Anti-corrosion powder coated surface finish. Ideal for storing and transporting Hi-Force products and accessories. Maintains and protects tool condition in harsh environments. Loackable feature helps control authorised tool usage.
22. Flow control valve
23. Directional control valve
Choice of 2, 3 or 4-way options. Designed to provide precise control of oil flow and pressure.
24. High pressure couplers and fittings
Suitable for working pressures up to 700 bar. Designed to ensure easy system connection and assembly.
25. Roller skate kit – quad – RKF
Low height design for increased stability and safety. Heavy duty construction with minimal maintenance required. Kit comprises of four skates with all necessary accessories. Includes two turntables for fitment to front steering skates. Maximum recommended speed of movement of 5 metres per minute.
26. Roller skate kit – tricycle – RKT
Low height design for increased stability and safety. Heavy duty construction with minimal maintenance required. Kit comprises of three skates with all necessary accessories. Centre front skate fitted with turntable for easy change of direction. Twin rear skates supplied with tie bar for increased stabulity.
27. Heavy duty skate – RSA
Low height design for increased stability and safety. Drilled bolt holes (4 nr.) on all models up to 50 tonnes capacity. Specially positioned bolt holes can be included as required. Maximum recommended speed of movement of 5 metres per minute. Can be used as a conveyor in fixed position under the moving load.
28. Heavy duty skate with grooved guide – RSD
Low height double roller design for even greater stability and safety. Twin sentre plate chain guides reduce wear significantly. Fixing bolt holes (6 nr.) included as standard feature. Maximum recommended speed of movement 5 metres per minute. Can be used as a conveyor in fixed position under the moving load.
29. Heavy duty skate with grooved guide – RSG
Suitable for use over longer distances and/or permanent loads. Centre plate chain guide reduces wear significantly. Optional fixing bolt holes available (standard on models RSG40 & RSG50). Maximum recommended speed of movement 5 metres per minute. Can be used as a conveyor in fixed position under the moving load.
30. Multi-purpose skate – RSN
Low height design for increased stability and safety. Heavy duty construction with minimal maintenance required. Turntables and levelling plates available for easy directional change. Maximum recommended speed of movement of 5 metres per minute.
